Inventory Relocation in Progress. Expect Delays, Followed by Faster Shipping.

Enraged Rabbit Carrot Feeder v1.1 Monster Kit

Enraged Rabbit Carrot Feeder v1.1 Monster Kit

Regular price
$229.99
Sale price
$229.99
Regular price
Sold out
Unit price
per 
Tax included.

Update: Monster Kits require 4-5 days extra processing time

The All New Mother Fucking Enraged Rabbit v1.1

There will be options to break this kit into smaller parts. This is just the first listing

Building on the awesome success of ERCF 1.0, Ette, and team, have created a fully featured MMU system. Built and designed in the Voron ecosystem, but ready for the wider world, this more mature kit can, with a little tuning, tackle anything you can throw at it, even if it's just 300 bender heads.

This massive kit includes the following items:

Stepper Motors and Servo

  • OMC NEMA14 Motor 14HS11-1004S x 1
  • OMC NEMA17 Motor 17HS08-1004S x 1
  • MG90 D/S Servo x 1

Main Kit

  • TCRT5000 Sensor x 1
  • Omron D2F-L x 1
  • Bondtech Gears
    • 4 cart: x 5
    • 6 cart: x 7
    • 9 cart: x 10
    • 12 cart: x 13
  • LM8LUU Bearings x 2
  • M5 threaded rods x 2
  • 8mm smooth rods x 2
  • D-cut 5mm shaft x 1
  • MR623ZZ bearing x 1
  • MR85ZZ bearings
    • 4 cart: x 5
    • 6 cart: x 5
    • 9 cart: x 6
    • 12 cart: x 7
  • M3 threaded inserts x 26
  • M5x30 BHCS x 2
  • M5x16 BHCS x 1
  • M5 nuts x 4
  • M5 nylock nuts x 5
  • M5 washers x 2
  • M3x8 SHCS x 20
  • M3x8 BHCS x 5
  • M3x12 SHCS x 3
  • M3x16 SHCS
    • 4 cart: x 8
    • 6 cart: x 10
    • 9 cart: x 13
    • 12 cart: x 16
  • M3x20 SHCS x 7
  • M3x40 SHCS x 2
  • M3 washers (could also be the DIN125 below) x 2
  • M3 DIN125 Steel Washer x 12
  • M2x8 SHCS or M2x10 SHCS x 2
  • GT2 belt 6mm (open)
    • 4 cart: x 388
    • 6 cart: x 482
    • 9 cart: x 623
    • 12 cart: x 764
  • GT2 20T Pulley 6 mm, 5mm bore x 3
  • GT2 20T Toothed Idler 6 mm, 5mm bore x 1
  • GT2 188m Belt loop 6mm x 1
  • 6mm x 3mm Round Neodymium Magnets
    • 4 cart: x 16
    • 6 cart: x 22
    • 9 cart: x 31
    • 12 cart: x 40
  • Bowden Clip
    • 4 cart: x 6
    • 6 cart: x 8
    • 9 cart: x 11
    • 12 cart: x 14
  • Bowden Fitting
    • 4 cart: x 6
    • 6 cart: x 8
    • 9 cart: x 11
    • 12 cart: x 14
  • 7X7 Drag chain x 1
  • MicroFit3 Male Pin (43031-0007) x 26
  • MicroFit3 Female Pin (43030-0007) x 26
  • MicroFit Connector Receptacle 4 Position (43645-0400) x 4
  • MicroFit Connector Plug 4 Position (43640-0401) x 4
  • MicroFit Connector Receptacle 5 Position (43645-0500 x 2
  • MicroFit Connector Plug 5 Position (43640-0501) x 2
  • EXTRA FASTENERS

Carrot Patch

  • 608 ZZ/2-RS x 1 per cart
  • M3 threaded inserts x 4 per cart
  • M5x30 BHCS x 1 per cart
  • M5 nylock nuts x 1 per cart
  • M3x8 SHCS x 2 per cart
  • M3x16 SHCS x 1 per cart
  • M3X20 SHCS x 1 per cart
  • Bowden Clip x 1 per cart
  • Bowden Fitting x 1 per cart
  • PC4-M10 Pneumatic Coupling x 1 per cart

Toolhead Sensor

  • AH3364Q-P-B Hall Effect sensor (SIP) x 1
  • M3 DIN125 Steel Washer x 1
  • 6mm x 3mm Round Neodymium Magnets x 1
  • JST XH 3 pins male connector x 1

Toolhead Board

  • Hartk Toolhead Board 3.rabbit x 1
  • Hartk Toolhead Board 3.rabbit Connectors Kit x 1

Stepper Drivers

  • BTT TMC 2209 v1.2 x 2

Stepper Board

  • ERCF Easy Board x 1

Boards come with SMD parts presoldered. The rest of the assembly will be up to the customer, using the included through hole parts.

Several notes on the project. First, the main repo is available here. Second, FEP/PTFE is NOT included in the kit. This is because everyone needs to judge the distance from feeder to machine, for themselves. The recommended length, per Carrot Patch, is 40cm. This means, as an example, a 9 cart ERCF, would require 360cm of FEP or PTFE.

I would like to thank Ette, as well as every beta tester and contributor, for the hard work they've put into this project. It's fucking amazing.

Finally, my most sincere thanks to everyone who purchased a 1.0 kit. Your purchases made every following kit less expensive. 

Customer Reviews

Based on 1 review Write a review